TROY Group Hewlett-Packard LaserJet 3005 Font Card Kit Quick-Start Guide - Manual (Page 4)

Font Memory Card Kits
Quick-Start Guide
Document # 50-70408-002 Rev. A
Page 4 of 11
STEP 4:
Install the TROY Support Files for Microsoft
®
Windows
™
NOTE: The Hewlett-Packard PCL 5e printer driver must be installed on the host computer prior to loading the
TROY support files (refer to STEP 2 on the previous page).
The TROY metrics file contains the required escape sequences that are used to “call” the TROY security and/or
optional barcode fonts installed in your TROY Security Printing Solution (via the TROY Font Memory Card).
When properly installed, the TROY metrics file will be associated with the PCL 5e printer driver used by your
Hewlett-Packard printer to enable printing of the actual fonts installed in the printer. By associating the metrics
file with the printer driver, the TROY TrueType screen fonts will be automatically replaced with the actual
TROY fonts at print time. If the TROY metrics file is not properly installed, then the TROY TrueType screen
fonts will print instead of the actual TROY installed printer fonts.
Install the TROY Metrics File for Windows
™
98SE, ME Operating Systems
1. Close all applications before installing the TROY Font support files.
2. Insert the TROY Security Printing Solutions CD into your computer CD-ROM drive.
3. From the Microsoft Windows Start menu, click on Settings, and then click on Printers.
4. Right-click on your TROY Security Printing Solutions printer icon, and then click on Properties from
the pull-down menu. If multiple printers are installed, make sure the correct printer icon is selected that
corresponds to your TROY Security Printing Solutions printer.
5. Click on the Configure tab located at the top of the Properties window.
6. Within the Other Options category, click on the More button. Some printer driver versions may not
display the Other Options category. If this is the case, simply skip to the next step.
7. Within the Fonts category, place a check mark in the Font Cards checkbox, and then click on the
Configure button (with some printer driver software versions, the Configure button may already be
“clicked”). A new window will open labeled Configure Font Cards.
8. Click on the Add button to open the Add Font Card window.
9. Click on the Browse button to open a Windows Explorer-style window. Click on the down-arrow in the
Drives box to select the CD-ROM drive on your computer. Double-click on the Support Files folder
from the list of folders, double-click on the HPD Files folder, and then double-click on the Domestic
folder. For international products, double-click on the International folder.
10. Click on the file (located in the left-hand window) named TroySEC.hpd or TroySECINTL.hpd (for
International customers), and then click on Open or OK (the displayed window may vary depending on
the operating system being used). With some printer drivers, the Add Font Card window will appear.
If this window appears, click on OK to close the window.
11. Within the Configure Font Cards window, verify the installation by clicking on the Font Card Name:
TROY Security Font Collection or TROY International Security Font Collection listed under Installed
Font Cards. Within the Fonts list, the TROY E-13B (enabled) along with other TROY fonts will be
displayed.
12. Repeat Steps 9 through 11 to install the barcode fonts. Double-click on the Support Files folder, the
HPD Files folder, and the Barcode folder, and then select the TroyBAR.hpd file. Verify the installation
by clicking on the Font Card Name: TROY Barcode Font Collection listed under Installed Font Cards.
Within the Fonts list, the TROY barcode fonts will be displayed.
13. Close all remaining open windows. Please refer to the TROY Font Memory Card Kit User’s Guide,
Section 3 – Using TROY Fonts before using the installed fonts.