Spicer HAXL-TEC-07 - Manual (Page 2)

Heavy Vehicle Technologies and Systems Service Dana Corporation www2.dana.com\expert www.dana.com
PO Box 321 Toledo, OH 43697 800-SAY-DANA (729-3262) Fax: 419-866-3925
INSTALLATION EFFECTS
The installation requirements for the Spicer LMS Hubcap are the same as other industry
standard hubcaps. These hubcaps are required to use appropriate fasteners and gaskets
purchased from Dana, or approved for use by Dana.
The LMS Hubcap eliminates requirements for the spindle-nut mounted Dana LMS wheel-end I.D.
Ring, for standard 3 or 4-piece spindle nut systems, and allows the Dana LMS hub to be specified
with alternative approved nut systems.
APPLICATION
The Spicer LMS Hubcap system for oil lubricated wheel ends will be available for Dana’s
10,000 through 22,000 lb. steer axle families, and can mate up with a host of bolt circle dimensions
ranging from 4.50” to 5.56”. Further, this new hubcap system will also be available for both TP and
TN (pro-par and tapered) spindle trailer axles ranging from 20,000 to 26,000 lb capacity and will also
mate up with bolt circle dimensions ranging from 5.50” to 6.75”.
AFTERMARKET / SERVICE IMPACT
The Spicer LMS hubcap system will be available through existing channels of parts
distribution. For part and service information refer to Information bulletin AXSM-0402.
WARRANTY
The Spicer LMS hubcap and wheel-end systems’ warranty for approved linehaul applications
with Spicer approved and OEM factory-filled, synthetic lube is up to 3 yr/350k miles on steer
axles and up to 5 years on trailer axles.
PRICING
Please contact your Dana Account Manager for a formal quote based on your specific
vehicle requirements
In addition to the information attached, please visit the Spicer web site at www.spicerparts.com
for the most current information regarding these new products. This new information will be
published and posted to the web site prior to production availability.
Trischa Carr
Aftermarket Product Analyst
Heavy Axle Products
Encl: AXSL-0017