Single reduction-forward axles before june 2008 – Spicer Drive Axles Illustrated Parts List DSP40(P), DSP41(P), DDP40(P), DDP41(P),RSP40, RSP41, RDP40, RDP41, P20060, P22060 User Manual
Page 16
14
Single Reduction-Forward Axles
Before June 2008
DSP40(P)
DDP40(P)
Item
Description
Qty
DSP41(P)
DDP41(P)
Notes
BASIC OVERHAUL KIT
510393
510399
Contents Identified with •
BEARING KIT
512812
512800
Contents Identified with *
1
Diff Carr & Brg Caps Kits-NLA Kits NLA - See Chart and Notes Below
Included: 1-3, 5, 67, 69-71 and
Model Type
Part No.
Notes
fasteners from 512087 pg 24 note 1 DSP40, DSP41
510023-NLA
Casting #130809
NOTE: All Original Carr/Caps are NLA, DSP40P, DSP41P
510024-NLA
Casting #130819
Must Purchase Complete Carrier.
DDP40, DDP41
510027-NLA
Casting #130814
Refer to bulletin abib-0805
DDP40P, DDP41P
510028-NLA
Casting #130814
2
Flat Washer
4
210288
210288
2A
Plug & O-ring Assembly
1
131809
131809
O-ring not sold seperately
3
Capscrew
4
210095
210095
4
Cotter Pin
2
090873
090873
Replaces 126156
5
Dowel Pin
2
007641
007641
6
Diff Brg Adjuster - Plain Half
1
129130
128616
7
Brg Cup - Plain Half
1
129566•*
015092•*
8
Brg Cone - Plain Half
1
129565•*
128604•*
9
Diff Brg Adjuster - Flange Half
1
129128
129128
10
Brg Cup - Flange Half
1
129564•*
129564•*
Replaces 90943
11
Brg Cone - Flange Half
1
129563•*
129563•*
Replaces 6082
WHEEL DIFF. CASE KITS
Includes items 12-14
12
Diff Case-RH (Flg Half)
1
133737 (was 129464)note-12
508653
508724
Ratios 2.64 to 3.25
133738 (was 129465)note-12
508654
508725
Ratios 3.36 to 3.90
133739 (was 129466)note-12
508655
508726
Ratios 4.11 to 4.88
133740 (was 129467)note-12
508656
508727
Ratios 5.29 to 7.17
13
Diff Case-LH (Plain Half)-Standard Mdl
1
132437
---
Was 127498 see note-12 below
Diff Case-LH (Plain Half)-Diff Lock Mdl
1
---
128607
14
Capscrew
12
127465
128619
NOTE 1: On June 3, 2002, the design of the carrier mounting flange changed. The new carrier’s are designed with a “Thick Flange”. Carriers designed
with a “Thick Flange” require the use of “long” capscrews. The fastening hardware for these models can be found on pages 23-24 of this IPL. Refer to
Dana bulletin ABIB-0210R1 for further details.
NOTE 12: All diff case halves are now available separately. Design enhancements in the diff cases were released in 2007, refer to bulletin ABIB-0704.