beautypg.com

Philips SCD525 User Manual

Page 19

background image

19

Why doesn’t battery symbol appear on the

display of the parent unit when I start to

recharge the parent unit?

• It may take a few minutes before the battery

symbol appears on the display of the parent

unit when you charge the parent for the first

time or after a long period of disuse.

Why is the connection lost every now and then?

Why are there sound interruptions?

• The baby unit and the parent unit are probably

close to the outer limits of the operating

range. Try a different location or decrease the

distance between the units. Please note that

it takes about 30 seconds each time before a

connection between the units is established.

• You may have placed the parent unit next to a

transmitter or other DECT appliance, such as

a DECT telephone or other 1.8GHz/1.9GHz

baby monitor. Move the parent unit away from

the other appliances until the connection is

re-established.

What happens during a power failure?

• If the parent unit is sufficiently charged,

it continues to operate during a power failure,

both inside and outside the charger. If there are

batteries in the baby unit, it also continues to

operate during a power failure.

Is my baby monitor secure from eavesdropping

and interference?

• The DECT technology of this baby monitor

guarantees no interference from other

equipment and no eavesdropping.

The operating time of the parent unit is

supposed to be up to 24 hours. Why is

the operating time of my parent unit shorter?

• When the parent unit has been charged for

the first time, the operating time is less than

24 hours. The rechargeable batteries only reach

their full capacity after you have charged and

discharged them at least four times.

• The volume of the parent unit may be set too

high, which causes the parent unit to consume

a lot of energy. Decrease the volume of the

parent unit

• The microphone sensitivity level of the baby

unit may be set too high, which causes the

parent unit to consume a lot of energy.

Decrease the microphone sensitivity level in

the menu of the parent unit.

ENGLISH