Philips SCD525 - Manual (Page 12)

12
7.4 Lullaby function
7.4.1 Selecting a lullaby
1
Select ‘Lullaby’ with the + and - buttons.
2
Press the OK button to confirm.
3
Press the + button once or several times to
select one of the five lullabies from the list or
to select ‘Play All’.
4
Press the OK button to confirm.
When you have selected one of the five lullabies,
it is played 5 times in a row.
When you select ‘play all’, all 5 lullabies are played
once.
7.4.2 Switching to another lullaby
1
Press the + button to choose another lullaby
from the list.
2
Press the OK button to confirm.
7.4.3 Pausing a lullaby
1
Press the OK button.
• The message ‘Paused’ appears on the
display.
2
Press the OK button again to resume the
lullaby.
If you do not continue the lullaby within 30
seconds, the lullaby function switches off
automatically. The message ‘Paused’ and the lullaby
symbol disappear from the display.
7.4.4 Stopping a lullaby
1
Press the + button to select ‘Stop’ from the
list.
2
Press the OK button to confirm.
In the ECO mode, the appliance consumes
less energy, but still ensures that you can always
hear your baby clearly without any distracting
noise. Using the baby monitor in the ECO mode
helps you to preserve the environment.
D Note:
The operating range of the baby monitor when
it is operated in the ECO mode is 260 meters
in open air. Depending on the surroundings and
other factor that may cause interference, this
range may be smaller.
1
Select ‘ECO mode’ with the + and -
buttons (Fig. 29).
2
Press the OK button to confirm (Fig. 30).
3
If the ECO mode is off, the display shows
‘On?’. Press the OK button to switch on
the ECO mode. If the ECO mode is on, the
display shows ‘Off?’. Press the OK button to
switch off the ECO mode.
• If you have set the ECO mode to ‘on’, the
parent unit switches off and on again. The
ECO mode symbol appears on the display
of the baby unit and the parent unit to
indicate that both units now operate in ECO
mode.
D Note:
The connection between parent and baby
unit may be lost when the ECO mode is
switched on. If this happens, the operating
range may be too large for the ECO mode. In
this case, either reduce the operating range or
switch off the ECO mode.
7.3 Nightlight on/off
1
Select ‘Light’ with the + and - buttons.
2
Press the OK button to confirm.
3
If the nightlight is off, the display shows
‘On?’. Press the OK button to switch on the
nightlight. If the nightlight is on, the display
shows ‘Off?’. Press the OK button to switch off
the nightlight.