Ohaus T31XW Indicator Manual en - Manual (Page 25)

EN-23 3000 Series Indicators
3.6.2 Parts Counting Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.3 End Mode
Advance to the next menu.
3.6 Mode Menu
Enter this menu to activate the desired application
modes.
Reset: No, Yes
Count:
Off, On
End Mode Exit MODE menu
3.6.1 Reset
Set the Mode menu to the factory defaults.
No
= not reset.
Yes = reset.
NOTE: If the Legal for trade menu item is set ON, the settings are not reset.