Ohaus T31XW Indicator Manual en - Manual (Page 11)

EN-9 3000 Series Indicators
1.3 Control Functions
Button
Primary Function
(Short Press) ON/ZERO
If Indicator is On, sets
zero.
PRINT
Sends the current value
to the COM port if
AUTOPRINT is set to Off.
FUNCTION
Initiates an application
mode.
TARE
Performs a tare
operation.
Secondary Function
(Long Press) Off
Turns the Indicator on
or off.
Units
Changes the weighing
Unit.
Mode
Allows changing the
application mode.
Press and hold allows
scrolling through modes.
Menu
Enter the User menu.
View the Audit Trail event
counters (extended
press)
Menu Function
(Short Press) Yes
Accepts the current
setting on the display.
No
Advances to the next
menu or menu item.
Rejects the current
setting on the display
and advances to the
next available setting.
Increments the value.
Back
Moves Back to previous
menu item.
Decrements the value.
Exit
Exits the User menu.
Aborts the calibration in
progress.
TABLE 1-5. CONTROL FUNCTIONS.
On/Zero
Off
Yes
Print
Units
No
Function
Mode
Back
Tare
Menu
Exit