Ohaus RE PRICE COMPUTING COMPACT SCALES Manual - Manual (Page 17)

RE Series EN-15
6.2 Type Approval Sealing
After the scale has been found to comply with local regulations by respective
approving authorities, the scale may be sealed in the following manner:
6.2.1 Wire Sealing
(1) Install the 2 cross drilled sealing screws securely as illustrated below.
Run the wire into the holes, then apply the seal in place.
6.2.2 Sticker Sealing
With screws installed, apply stickers to any of the positions illustrated below
(2).
2
2
1