Ohaus RE PRICE COMPUTING COMPACT SCALES Manual - Manual (Page 14)

EN-12 RE Series
5. SCALE SETTINGS
5.1 Accessing the User Setup Mode
Press [PLU] [4] [4] [4] [4]. “ oP ” will be displayed, then press [FIX].
To navigate in the User Setup Mode:
• Press [FIX] to accept the displayed setting and proceed to the next step
• Press [>T<] to toggle through available settings
• Press [>0<] to return to the previous steps
• Press [PLU] to end setup and proceed to “Save”
5.2 User Setup Parameters
Window Display
Weight Unit Price Description Available Settings
oP StEP 1 Key-press beeper ON : Enables this function
OFF : Disables this function
Step 2 Sleep /
Automatic Power-
off
(battery operation
only) 0 : Sleep mode disabled / Auto-off disabled
1 : Sleep mode disabled / Auto-off after 30 min.
2 : Sleep mode after 5 min. / Auto-off disabled
3 : Sleep mode after 5 min. / Auto-off after 30 min.
4 : Sleep mode after 15 min. / Auto-off disabled
5 : Sleep mode after 15 min. / Auto-off after 30 min.
Step 3 Automatic clearing
of tare and unit
price ON : Auto-clear when weight is removed from the
pan
OFF : Manual clear by pressing [C]
Step 4 Pre-pack (Fix)
Mode ON : Enables this function
OFF : Disables this function
Step 5 Auto PLU ON : Search PLU automatically
OFF : Search PLU after pressing [PLU]
Step 6 1 or 2 PLU’s
per M-key ON : 2 PLU’s can be stored per M-key
OFF : Only 1 PLU can be stored per M-key
Step 7 Filtering level 0 : No filtering
1 : Low (faster display speed)
2 :
Normal
3 : High
Step 8 Communication 0, 1, 2, 3
(not applicable; do not change)
Save Save or Abort Save : Saves changes and restarts to weighing mode
Abort : Restarts to weighing mode without saving
changes
Note: Bold settings are defaults.