Ohaus RE PRICE COMPUTING COMPACT SCALES Manual - Manual (Page 12)

EN-10 RE Series
3. If set to store two PLU’s per M-key, press and hold the desired M-
key until the long beep, then quickly press the M-key again
within 1 second. “
L2 ” appears momentarily to indicate the data
is stored in the second memory location of that M-key.
4.9.2.2 Recalling a PLU from the M-Key
1. Press the
M-key with the pre-stored data. The corresponding
Unit Price/Tare value will be displayed.
2. If set to store two PLU’s per M-key, quick press the M-key twice
within 1 second. “ L2 ” appears momentarily, then the
corresponding Unit Price/Tare value.
Note: If pressing an M-key with no stored data, “ noPLu ” will show
momentarily in the Weight display.
4.10 By-Count Function
The By-Count function is used as reference to calculate the price of non-
weighing items, e.g., the price for 36 pieces when 3 pieces cost a total of
$1.50.
1. Enter the deal quantity (1-99), e.g., “
3 ”, then press [X]. The X
annunciator will turn on to indicate the scale is in the By-Count mode.
2. Enter the deal price, e.g., “ 1.50 ”, then press [FIX]. The Unit Price
display will show “ 1.50 ”.
3. Enter the quantity to be sold, e.g., “ 36 ”. The resulting total price of
“ 18.00 ” is shown in the Total Price display. Keep entering another
quantity as needed.
4. To end the By-Count function and return to normal weighing mode,
press [C].
4.11 Accumulation (Totalize) Function
The Accumulation function is used to add the Total Price of several
weighings.
4.11.1 Accumulating
1. Perform a pricing transaction as described in Section 4.6.
2. Press
[+]. The displayed Total Price is added to the accumulation
memory, and the ADD and TOTAL annunciators will turn on.