KC HiLiTES KC #9560A_9560C 24v HID Harness Instructions - Manual

Wiring Instructions for the
KC 9560/9560B 12v or KC 9560A/9560C 24v HID Harness
1. Unplug any power wires that you currently have connected to your existing ballasts. If you do not have any power wires
connected, just plug in the wires coming from the relay on your new harness.
2. Attach the black wire on the relay to chassis ground.
3. Attach the yellow wire to a 12/24V power source (depending on the voltage of your vehicle).
4. Attach the white wire as indicated in drawing.
5. Attach the brown wire to chassis ground.
KC HiLiTES, Inc., Post Office Box 155, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com 3265V - rev 071610
SWITCH
Earth Supply
L
o
a
d
87
30
85
86
K
C
B
al
la
st K
C
B
al
la
st
Light Light
Chassis
Ground
Chassis
Ground
B
ro
w
n
w
ir
e
G
re
e
n
w
ir
e
White wire
3 Amp
Fuse 12 volt DC
Hi Beam
Low Beam
or Ignition
Black wire
Yellow wire
Lights and ballast shown above
are not included with this harness.
87
Plug wires from relay
into 1 or 2 KC ballasts.
Fuse
20 Amp if 12v
10 Amp if 24v
RELAY
9 - 32 VDC
Power Source