High Lifter Radiator Relocation Kit - Can-Am Outlander Models - Manual (Page 6)

13. Once you have cut the holes for the hoses, place the kit back onto the front rack and
attach kit using the mounting brackets and knobs provided. The backing plate goes under
the plastic rack and the radiator shroud goes on the top of the plastic rack.
14. Run the hoses from kit to the inlet and outlet hoses that are still attached to the engine.
You will need to cut to length. Using the clamps provided in the kit connect the hoses to
the inlet and outlet ports on the radiator. You will join the new hoses to the old hoses you
left attached to the engine using the straight fittings and clamps provided in the kit.