High Lifter Lift Kit for Kawasaki Brute Force 750i - Signature Series - Manual (Page 5)

5
Rear Lift
1) Place jack under ATV at the rear of the bottom skid plate and lift until the weight is off of the
suspension. Be careful to secure the ATV properly so as not to fall off the jack.
2) Remove the top of the shock from the shock mount.
3) Insert the long rear lift bracket in place.
4) Place the spacer in the shock mount and the small lift bracket to the rear of the frame holding it in
place with the 10x65mm bolt and fasten with 10mm lock nut.