High Lifter Lift Kit for Arctic Cat 700 - Manual (Page 4)

9. Once the lift kit is installed and the bolts are reversed on both sides, place the wheels back onto the ATV
and torque all lugs to factory specifications.
Rear Lift Installation Instructions
1. Place jack under the ATV rear end and lift until the wheels are off the ground. Be careful to support the
ATV properly so that it is secure, but so that the A-arms and shocks can droop to full extension.
2. Remove the rear wheels and the top of the shocks.
3. Place the Large Spacer on the inside of the top shock mount.
4. Next, place the rear lift brackets onto the shock mount. Make sure that you place the notched rear lift
bracket so that it clears the frame on one side of the shock mount and the un-notched bracket on the
opposite side. Secure them in place using the 10x50mm hex bolt and 10mm lock nut.
4