High Lifter Radiator Relocation Kit - Polaris 800 (05-14) - Manual (Page 8)

18. Once you connect the hoses to the inlet and outlet ports on the radiator, connect the filler
neck water line to the inlet.
19. Use the T-fitting and 90° fitting and hose clamps. Connect the T-fitting to the inlet port
using enough hose to center the fitting between the port at the top of the radiator and top
of the lid. Let enough hose run through the top of the lid to connect a 90° fitting jut
under the lid.
20. Connect 3” of black hose to the filler neck and a 90° fitting. Now run enough hose over
to the T-fitting and clap it to the fitting.
21. Insert 90° fittings into the hoses under the radiator and lid. Now connect hose to the 90°
fittings and run them down to the stock hoses still connected to the engine.