High Lifter Max Clearance Rear Lower Control Arms for Polaris RZR 800 "S & "4"" - Manual (Page 3)

3
Installation Instructions
1) Place jack under the rear center and lift until the weight is off the suspension. Be
careful to secure properly so that it is stable on the jack.
2) Remove the rear wheels.
3) Remove the lower control arms from both sides.
4) Remove the stock bushing and sleeves from the factory arm and insert them into the
new High Lifter lower control arms.
Note: Placing some grease on the bushing and sleeves. This makes the installation easier.
5) Insert the new grease 90 degree grease fittings.