High Lifter FLOORBOARD KIT- SUZUKI 700 KING QUAD 2005-2007 ONLY - Manual

1
High Lifter Products, Inc. 318-524-2270
780 Professional N. Dr. Fax 318-524-2297
Shreveport, LA 71105
Suzuki King Quad Fender Kit
Installation Instructions
Parts List:
Fender Kit
1pair
8mm x 40mm Hex Bolt 8ea
8mm Lock Nut 8ea
8mm Flat Washer 16ea
READ FULLY BEFORE INSTALLATION!
This kit allows for the permanent removal of the steel support brackets that are located in the rear fender
well, which provide support and protection rear portion of the floorboards.
The objective of the kit is to allow removal of the obstruction to oversize tires that is caused by this
stock support bracket. This is replaced with a heavy-duty support bracket that fits entirely under the
floorboards and bolts to the frame and foot peg support.
If this is not what you expected, or is not consistent with your intended use, you should return the
product immediately to the seller, before installation, for a refund of the purchase price; less any fees.
After installation, product is warranted for 90 days for defects in workmanship and materials. Warranty
is limited to refund of the purchase price or replacement of the kit, at the seller’s option.