High Lifter Radiator Relocation Kit - Yamaha Grizzly 700 (07-13) - Manual (Page 4)

4
High Lifter Products 1-800-699-0947
7. There is vent line attached to the stock fan that you will need to trim. Cut the vent line
leaving about 15”. You will need to route the vent line down into the front plastic at the
end of the installation.
8. Connect the stock radiator to the relocation kit by using four spacers, four ¼ x 3”
carriage bolts, four ¼” flat washers, and ¼” lock nuts.