High Lifter Lift Kit for Honda Rancher 420 SRA Only (07-13) - Manual (Page 3)

Installation Instructions
1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to
support ATV properly so that it is securely supported but so that A-arms and shocks can droop to
full extension.
2) Remove front wheels.
3) Remove the shock from the ATV frame.
4) Insert the Front Lift Bracket onto the lower shock mount and Medium Spacer.
5) Secure the tube bracket and the spacer using the 10x55 Hex Bolt and 10mm Lock Nut.
6) Next, remove the bolt that holds the brake line in place.
7) Attach the support bracket, loosely, to the brake line bracket location. Use the 6mm x 16mm hex
bolt.
3