GE Healthcare Optima MR450w - Manual (Page 9)

GE Healthcare Optima MR450w 7
Dual-sided scanner control panels
Within reach.
Control the scanner from either side of the patient table
and easily access cardiac or peripheral gating leads and
IV lines. Backlit buttons indicate the next logical step in
the exam process, simplifying patient setup.
IntelliTouch patient positioning
Start scanning in just two simple steps.
Set up your patients in as little as 30 seconds, and in just
two simple steps. Along with the use of the detachable
table, IntelliTouch patient positioning shortens in-room
set-up time by up to 70% over fixed-table designs.
To operate, simply press the IntelliTouch strip on either
side of the patient table at the landmark location, then
press the Advance to Scan button to begin scanning.
In-Room Operator Console
Fast exam setup — at your fingertips.
Mounted conveniently on the front of the magnet,
the high-resolution color console of the Optima
MR450w consolidates patient set-up information and
operator controls in one place that’s easy to see.
View patient, system and scan information, control
and select parameters, change scanner configurations,
and initiate scans in real time right in the room. Save
footsteps by eliminating multiple trips to and from the
control room.
When AutoStart ™ is selected on the iROC, the system
will start scanning automatically when the scan room
door is closed.
Optional
Optional