EVS Xsquare Version 1.0 - July 2012 User Manual - Manual (Page 23)

Xsquare – Version 1.0 – User Manual
EVS Broadcast Equipment – June 2012
Issue 1.0.C
17
• XTAccess Group for Vedio
• XTAccess SN (not editable)
• XTAccess IP (not editable)
• XSecure validity date (not editable)
Configuration
• Total max dest: maximum number of destinations that one XTAccess can handle
(transcoding jobs included).
• Total max trans: maximum number of destinations that one XTAccess can transcode.
Note
One job can contain several destinations.
• Nbr EDL Sub Jobs: maximum number of child jobs that XTAccess can do
simultaneously during a backup EDL + Clips.
• FileWriter NoBuffering: option to increase the performance when XTAccess writes on
a non Windows storage.
• FileReader NoBuffering: option to increase the performance when XTAccess reads a
non Windows storage.
• QT Ref optimisation: option which forces all QTRef files to be seen as growing files
by XTAccess.
Disabling an XTAccess
On this interface you can also disable one XTAccess:
Note
XTGateway will be configured by default to be able to do four operations of
playlist rendering at the same time. It will be impossible to change this
configuration from Xsquare. The modification of the XTGateway configuration
must be done manually.
You will still have to install and configure manually the EVS AVID Tools for the
integration with the Avid Transfer Manager. Xsquare will not manage the AVID
TMclient.ini file.
The following parameters will not be available on the Xsquare Configuration
interface. So, if necessary, these parameters will have to be configured
manually on each XTAccess (registry keys).
• Max Log size In MB (Default 2)
• IP Retry (Default 12)