EVS Xsquare Version 1.0 - July 2012 User Manual - Manual (Page 17)

Xsquare – Version 1.0 – User Manual
EVS Broadcast Equipment – June 2012
Issue 1.0.C
11
Target Definition
For each target you will have to define:
• Name: name that could be displayed on the client interface.
• Template: template with all the job parameters.
• Icon: icon which represents the target.
• Description(s): description of each destination.
• Destination(s): path or IP address.
How to Add/Remove a Target
To add/remove a target you just have to click on the + or – button on the bottom of the
window:
5.3.2 Scanfolders
Scanfolder Definition
You can create here Scanfolders. These are actually watch folders which will send jobs to
Xsquare each time there is a new media in it.
For each scanfolder, you will have to define:
• Source folder: UNC Path where the Xsquare scanfolder will wait for media files.
Warning
You cannot create two scanfolders in the same folder.
The scanfolder source must be a shared folder on the network (UNC Path) and
the scanfolder service must have Read/Write access to it.
• Filter: filter to scan only some specific files (based on the extension).
• Template: template with all the job parameters.
• Icon: icon which represents the target.
• Description(s): short description for each destination.
• Destination(s): path or IP address.