3 lock button, 4 transport command bar, Tlo recue button – EVS IPDirector Version 5.9 - January 2011 Part 9 User’s Manual User Manual
Page 16: Tlo pause button, Tlo play button, 5 master/slave synchronization buttons, Sync tle button, Lock button, Transport command bar, Master/slave synchronization buttons
Issue 5.9.B
IP Director – Version 5.9 – User’s Manual – Part 9: Part 9: Edit While Playout
EVS Broadcast Equipment – January 2011
1.3.3 L
OCK
B
UTTON
When the user clicks the Lock button
, it becomes active
. This means the
PGM1/2 are locked, and the Transport Control commands and Commit button are
no longer available.
When the user clicks again the Lock button, it unlocks the PGM1/2, and the
commands become available again. The lock on the player channels is however
preserved, as usual.
1.3.4 T
RANSPORT
C
OMMAND
B
AR
TLO
R
ECUE
B
UTTON
Pressing TLO Recue button loads the on-air timeline on the first frame of the first
element.
TLO
P
AUSE
B
UTTON
Pressing the TLO Pause button stops the playout of the TLO at the current
position.
TLO
P
LAY
B
UTTON
Pressing the TLO Play button starts the playout of the TLO from the nowline
position.
1.3.5 M
ASTER
/S
LAVE
S
YNCHRONIZATION
B
UTTONS
S
YNC
TLE
B
UTTON
The Sync TLE button is only relevant with the Master/Slave redundancy.
In this configuration, the Sync TLE button allows synchronizing the TLE on the
Master and the Slave instances of IPEDIT. This means that:
•
The TLE is copied from the ‘Master IPEdit’ to the ‘Slave IPEDIT’.
•
The timeline elements are created as clips on the Slave EVS server.
6