EVS Xfile Version 1.11 - April 2007 User Manual User Manual

Page 62

XFILE Version 1.11 – User’s Manual

Author: M. Lothaire

Issue 1.0

2. then change the display of the XNet list to find one location. Select the
location to publish the clip(s) in the page, the bank and the camera
selection.

3. press

(SchedulePublish) to initiate the transfer of the selected clip.

4. select other clips froma the XFile list and repeat the operation.

5.. and then press

(UpdatePublish) to update the clips on the XNet.

Important Note: The UpdatePublish command will disconnect the

XFile from the XNet and then re-connect the XFile to the XNet. During
this operation, the Multicam database is updated with the new publish
list of the XFile.

The

command will stop the current playbacks of XFILE clips

without prior notice

The

command will make ‘unavailable’ the XFILE clips included into

a playlist without prior notice.

MULTI-SELECTION FOR PUBLISH

1. Press SHIFT or CTRL and select a batch of clips from the XFile list or
press CTRL + A to select all the clips displayed in the XFile list.

2.. Change the display of the list to find one location and select the first
location to publish the clips

3. Press

to open the following window: