EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 58)

XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
Issue 1.0
57
To display the page/bank list, press and to display the list of cameras,
press .
4a. press (MOVEclip) to initiate the transfer of the selected clip. The
UmID (ID-material/ID-louth) is preserved.
4b. or press (COPYclip) to intiate the transfer and to create a COPY
of the selected clip. In this case a new IDlouth is defined.
To ensure the validity of data during operations, only one UmID can be
present on the same network. Then if the operator has to use identical
clips on several machines, the COPYclip command is advised to restore
several versions of the same clip.
4c. or press
(Short COPYclip) to initiate the transfer of a shorter copy
of the selected clip. Only the V/A material included between the shortIN
and the shortOUT points (without guardbands) will be restored. In this
case, a new IDmaterial and a new IDlouth are defined.
The following error message notices the operator if the selected clip is
already present on the network: