EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 21)

Issue 1.0 XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
20
2. then Select the camera angles desired to be part of the autobackup
process. Selected cameras appear in a green square, and unselected
cameras in a red square
Note: For the AirBox and SpotBox servers, all cameras must be
selected.
3. Press OK to confirm the selection and to close the window.
4. Press the Autobackup button
Different shortcuts are available to select cameras or systems with ease:
Reset: clears all selections
Backup all: selects all cameras of all systems. New systems being
connected will be also backed up.
Backup all present: selects all cameras of all systems currently connected
to the network.
Backup all Present PREF cam: selects all preferential cameras of all
systems currently connected to the network.
ADDITIONAL CRITERIA:
ARCHIVE STATUS
The basic working of the XFile is to compare the content of its disks with
the clips present on the XNet. According to the result, the missing clips on
disk will be automatically backed up.
If several disks are required to backup a complete session, the Archive
status must be kept to avoid a second backup of same clips while changing
the disks.
Three conditions are required to validate the Archive status:
1. Before the Autobackup session, place a checkmark in the following box: