EVS IPDirector Version 6.2 - June 2013 AB ROLL PLAYLIST User Manual - Manual (Page 19)

3. Managing Channels
3.1. Introduction
Before you can use the AB Roll Playlist, you need to define a group of channels and
assign that group to the AB Roll Playlist. These operations are explained in sections
"Defining a Channel Group for the AB Roll Playlist" on page 11 and "Assigning Channels
to the AB Roll Playlist" on page 12.
3.2. Defining a Channel Group for the AB
Roll Playlist
Purpose
The AB Roll Playlist mode is intended to be used with the AB Roll Playlist module. Up to 4
player channels can be managed with the AB Roll Playlist module. This group of channels
must be defined from the Channel Explorer.
How to Define a Channel Group for Use with AB Roll
Playlist
To define a group of channels from the Channel Explorer, proceed as follows:
1. Select up to 4 player channels.
2. Right-click the selected channel group.
3. Select AB Roll Playlist from the contextual menu.
IPDirector - Version 6.2 - User Manual - AB Roll Playlist
3. Managing Channels 11