EVS XEDIO Importer Version 4.35 - August 2013 User Manual - Manual (Page 13)

2.2. Import Process
To be able to import files from XDCAM, XDCAMEX, P2 and CANON cameras, you need
to proceed as follows:
1. In the Setup window you can access by clicking the Setup button, define:
◦ the source and destination locations,
◦ the default values for the properties of the imported files,
◦ the audio channel assignment.
2. Specify the Label field, that is to say the name of the media when it will be imported
into Xedio CleanEdit.
3. If requested, change the file properties before you perform a given import.
4. Ensure that the Published check box is ticked to make the media available and
visible to all users.
5. Select the files you want to import from the Media List:
◦ Press CTRL + click on the files for a selection of multiple non-contiguous files.
◦ Press SHIFT + click on the first and last file for a selection of multiple contiguous
files.
6. Click the Start Import Process button at the bottom of window.
At the end of the import process, a message specifies how many files have been
successfully imported. Once imported, the files are available in CleanEdit, in the Media
Manager tab.
2.3. Fields in the XDCAM, XDCAMEX, P2
and CANON Tabs
General Properties
Field Description
Auto
Src
Disk List of disks detected when the source files are searched on disks using the
Auto Src Disk process (selected in the Setup).
Aspect
Ratio Check box to select how the aspect ratio of the imported files will be chosen.
Possible values:
• 4/3: all the files with 4/3 aspect ratio are automatically imported.
• 16/9: all the files with 16/9 aspect ratio are automatically imported
• 4/3 and 16/9: all the 4/3 files and the 16/9 files are automatically
imported.
• "No aspect ratio selected": you need to manually select the files to
import in the Media List.
USER MANUAL Xedio 4.35 Xedio Importer
2. Importing XDCAM, XDCAMEX, P2 and CANON Files 5