Concord ULTIMAX ISOFIX INSTRUCTION MANUAL User Manual
Page 11
35
34
If the child‘s bodyweight exceeds 8 kg, the
pre-mounted pelvic insert should be removed.
This can be found in a pocket under the seat,
on the reverse of the seat cover.
_ CARE inSTRUCTiOnS
Light dirt can be easily removed with a damp cloth. The cover can also be removed and
washed at 30°C. Remove the back cushion from the cover of the head support before
you wash it.
The cover material colour may run slightly when wet, in particular during washing.
Do not use solvents on the cover!
_ REmOVing / ATTACHing THE COVER
_ REmOVing THE PELViC inSERT
To remove the cover the seat (
a
) has to be
removed from the base (
B
) (see „REMOVING THE
SEAT“).
Loosen the rubber bands and push buttons
of the cover, which are located in the places
marked red on the reverse side of the cover.
Open the harness lock (
02
).
First remove the cover from the head support
(
01
).
Thread the harness lock (
02
) through the
harness lock cushioning and out underneath
the cover.
Open the Velcro fastener on the harness
guides and remove the cover from the seat.
The covers are attached in reverse order.
Check that all the locks are closed and all
anchorings are correctly fastened.