AASTRA 4147 Medium for MX-ONE (TSE) User Guide EN - Manual (Page 21)

21 Dialog 4106 Basic/Dialog 4147 Medium
Outgoing Calls
Last Number Redial
When you initiate a call (internal or external) the phone
automatically stores all the dialed digits, irrespective of whether the
call was successful or not. Stored numbers can consist of
maximum 32 digits.
Note: To redial a number that incorporates a pause for a
new dial tone, you must indicate to the telephone where in
the number it must pause and wait for the new dial tone. To
do this, press the Redial/Pause key at the proper place in
the number. See section “ Wait for dial tone ” on page 19. u
Lift the handset.
©
Press to redial the last dialed number.
Last External Number Redial
When you initiate an external call the system automatically stores all
the dialed digits, irrespective of whether the call was successful or
not.
Note: To redial a number that incorporates a pause for a
new dial tone, you must indicate to the telephone where in
the number it must pause and wait for the new dial tone. To
do this, press the Redial/Pause key at the proper place in
the number. See section “ Wait for dial tone ” on page 19. u
Lift the handset. ***
Press to redial the last dialed external number.
Note: Finland and Sweden, dial
* * 0