AASTRA 6730i Installation Guide EN - Manual (Page 17)

Other Phone Features
14
41-001277-06 Rev 00 – 07.2011
Other Phone Features
Adjusting the Volume
Pressing the volume button adjusts the receiver, speaker, and ringer volume.
Status Lights (LEDs)
The speaker LED, beside the key, and the Message Waiting Indicator (MWI) LED, on the top right of your phone,
provide visual indications of your phone’s status.
Speaker LED
Message Waiting Indicator (MWI)
Call Timer
• When you make or answer a call, the Timer shows the elapsed time of the call.
• To adjust the ringer volume, leave the handset in the cradle and press the volume button
while there is no active call. There are 10 settings for the ringer including Off — the display will tem-
porarily indicate the current ringer volume setting.
• To adjust the handset volume, lift the handset and press the volume button while the hand-
set is off hook. The handset will remain at this volume until it is adjusted again.
• To adjust the speaker volume, press the volume button while the speaker is activated (acti-
vate the speaker by pressing ; ensure handsfree speakerphone audio mode is set). The speaker
will remain at this volume until it is adjusted again.
Speaker LED Status Description
ON solid Indicates a call is on Speaker (speakerphone).
Rapid Flash
Indicates the call is muted. Press to take the call off mute.
MWI LED Status Description
Slow Flash Indicates you have a message(s).
Rapid Flash Indicates you have an incoming call.
Even Flash Indicates one or more calls are on hold.