Setting modem configurations, Setting modem conﬁgurations, Enter the settings. see – Garmin iQue 3600a User Manual

Page 112

Chapter 10 Setting Connection and Network Preferences

10.2

Setting Connection and Network Preferences: Connection Preferences

Setting Modem Conﬁgurations

Modem conﬁgurations let your iQue handheld use a connected modem to communicate with remote devices, such as your ISP or

dial-in server, to access a remote computer.
You must set Network preferences, in addition to conﬁguring Modem settings, to be able to use TCP/IP software included in the

handheld operating system to connect to remote devices.

To set Serial to Modem preferences:

1. Tap the

Home icon

. Then tap the

Prefs icon

2. Tap the pick list in the upper right corner of the screen and select

Connection.

3. Select

Standard Modem and tap Edit. The name of the current conﬁguration appears at the top of the screen.

4. Tap the

Connect to pick list and select the device you want to connect to.

5. Tap the

Via pick list and select the type of connection.

6. In the Dialing pick list, tap

TouchTone or Rotary. Select Rotary only if your telephone service does not support

TouchTone dialing.

7. Tap the

Volume pick list and select the speaker volume for the modem.

8. Tap the

Details button at the bottom of the screen for the following additional settings:

• Tap the

Speed pick list and select the maximum speed for your modem to communicate with your handheld.

(This setting does not control the speed at which your modem communicates with your telephone service.)

• Tap the

Flow Control (Flow Ctl) pick list, and select Automatic, On (Xon), or Off (Xoff) ﬂow control for the

modem connection.

• If necessary, edit the Init String text to change the modem setup string.

9. Tap

OK through each screen until you are returned to the Connection Preferences screen.