Garmin GNC 300XL TSO - Manual (Page 123)

To restore user data from a user data card to the GNC 300XL:
1. Install the user data card.
2. Rotate O to highlight ‘Restore user data?’.
3. Press E .
The GNC 300XL will ask you which type of data to replace. You may choose
checklists, scheduler messages, user waypoints, proximity waypoints, routes, way-
point comments, or all data.
4. Rotate
K
to select the type of data to replace.
You may either replace or update the information in the database. Replacing the
data will replace ALL user data with the data from the card. Updating the data will
not delete unrelated material, but will only change what is necessary to use the data
received from the user data card.
5. Rotate O to select either ‘Replace?’ or ‘Update?’.
6. Press
E
to begin transferring data to the GNC 300XL. The GNC 300XL will now transfer
all of the data requested. This may take a few minutes.
7. To continue with more data transfer types, repeat steps 4, 5 and 6. Otherwise, press E
when ‘ok?’ is highlighted.
8. Turn the GNC 300XL off and replace the user data card with a NavData card. The GNC
300XL is now ready for normal operation.
113
APPENDIX
A
NAVDATA CARD
Saving User Data
Data transfer page
Restore data page
300xl manual 1/25/99 2:36 PM Page 113