Garmin GPS 75 - Manual (Page 68)

C-8
The universal mount is designed to allow the GPS 75 to be installed
either with or without the battery pack attached. To adjust the universal
mount to accept the GPS 75 with the battery pack attached:
· Loosen the coinslot screw.
· Raise the connector plate to its tallest position.
· Tighten the coinslot screw. When adjusted properly, the coinslot
screw should fit completely into the counterbore in the cradle so
that all surfaces are flush.
C.4 UNIVERSAL MOUNT OPERATION
The universal mount has been designed for easy insertion and removal
of your GPS 75 if you wish to use the unit in another boat or vehicle, plan
at home, or prevent theft.
To insert the GPS 75 into the universal mount...
· Tilt the top of the GPS 75 into the universal mount as shown.
· Engage the slot in the top of the GPS 75 into the raised bump in
the universal mount.
· Rotate the bottom of the GPS 75 into the universal mount until the
unit latches securely into place.