Wpt key – Garmin GPS 150XL User Manual
Page 48
The airport runway page displays runway designations, length, surface and
lighting for the selected airport, as well as ILS/localizer and/or pilot-controlled lighting
frequencies.
To view the runway page from any of the airport information pages:
1. Rotate
O
with the cursor removed to display the runway page.
2. To view additional runway information, rotate
K
with the cursor removed.
The scrolling arrow prompt, located beside the identifier field, indicates which direction to
scroll for additional runway information.
If a localizer and/or ILS are used on the same runway, rotating
K will sequence
through both sets of information.
The following descriptions and abbreviations are used on the airport runway page:
Runway surfaces:
• hard - Hard (concrete, asphalt, etc.)
• turf - Turf (grass)
• seal - Sealed surface
• grav - Gravel surface
• dirt - Dirt surface
• soft - Unknown soft surface
• unkn -Unknown surface
• watr - Water landing site
Runway lighting:
• pt lights - Part-time lights
• ft lights - Full-time lights
• pc - Pilot-controlled (with frequency) lights
• no lights - No runway lighting
38
To view additional runways, rotate the
K
knob in
the direction of the arrow prompts.
Airport runway page for KICT.
SECTION
2
WPT KEY
Airport
Runway Page
150xl manual B 8/4/98 1:09 PM Page 38