Garmin GPS 150XL - Manual (Page 31)

In addition to the five other navigation pages, the GPS 150XL features two menu
pages to perform a host of planning and navigation functions. NAV Menu 1 provides
access to the following functions:
• Trip Planning • Density altitude/true airspeed calc.
• Fuel Planning • Winds aloft calculations
• VNAV Planning • Checklists
To display NAV Menu 1:
1. Press
N
.
2. Rotate O until NAV Menu 1 is displayed.
Trip Plan is the first function listed on NAV Menu 1 and allows the pilot to view
distance, ESA, bearing and estimated time enroute (ETE) between any two waypoints,
and for programmed route legs. The ground speed can be varied manually to calcu-
late several possible ETEs.
To use the trip planning function:
1. Press N and rotate O until NAV Menu 1 is displayed.
2. Press
C
, then
E
to access trip planning.
3. Rotate
K
to select waypoint mode or desired route number and press
E
.
4. For direct-to navigation, use
K
and
O
to enter the ‘to’ and ‘from’ waypoints. Press
E
to accept the waypoints. To use your present position as a waypoint, leave the way-
point field blank.
5. For route calculations, choose either ‘cum’ for cumulative data (from beginning to end) or
the leg desired by rotating
K
.
6. Use
K
and
O
to enter the ground speed. Press
E
to calculate the values and
C
to finish. 21
Trip planning with values calculated between two
waypoints.
NAV Menu 1
SECTION
1
NAV KEY
NAV Menu 1
Trip Planning
150xl manual B 8/4/98 1:09 PM Page 21