Adding a dsc contact, Viewing the dsc list, Receiving distress calls – Garmin GPSMAP 526s User Manual
Page 69
GPSMAP 400/500 Series Owner’s Manual
63
Digital Selective Calling
To turn DSC on or off:
1� Select
Configure
>
Other Vessels
�
2� Select
DSC
to toggle it on or off�
Adding a DSC Contact
You can make calls to a DSC contact from the chartplotter. See
for information on making an individual routine call.
1� While viewing a chart, press
MENU
>
Other Vessels
>
DSC
>
DSC List
>
Add Contact
�
2� Use the
Rocker
to enter the Maritime Mobile Service Identity
(MMSI) number of the vessel, and press
SELECT
�
3� Use the on-screen keyboard to enter the name of the vessel, and
select
Done
�
Viewing the DSC List
The DSC list is a log of the most-recent DSC calls and other DSC
contacts you have entered. The DSC list can contain up to 100
entries. The DSC list shows the most-recent call from a boat. If a
second call is received from the same boat, it replaces the first call in
the call list.
From a chart screen, press
MENU
>
Other Vessels
>
dSC
>
dSC
List
.
Receiving Distress Calls
If your Garmin chartplotter and VHF radio are connected via NMEA
0183 or NMEA 2000, your chartplotter alerts you when your VHF
radio receives a DSC distress call. If position information was sent
with the distress call, that information is also available and recorded
with the call.
The symbol designates a distress call in the DSC List and marks
the position of a vessel on the Navigation chart at the time the DSC
distress call was sent.
When you receive a DSC distress call:
1� Select
Review
to view details about the call�
2� Complete one of the following:
• Select
Call with Radio
to set up an individual routine call
with the radio to call the vessel in distress (
)� This
option is only available if you are using a Garmin NMEA
2000-compatible VHF radio�
• Select
Edit
to edit the vessel name and add a comment� If
your radio is tracking the position of the vessel, select
Trail
to
show or hide the trail line for the vessel, and select
Trail Line
to change the line color� Select
Clear Report
to delete the
call report� Select
Create Waypoint
to set a waypoint at the
position sent with the distress call�