Garmin GPSMAP 526s - Manual (Page 33)

GPSMAP 400/500 Series Owner’s Manual 27
Where To?
4� Press SELECT � Repeat this step to add additional turns�
5� Press MENU to cancel, to undo the last turn, or to begin
navigating the route�
To create a route in another location:
1� From the Home screen, select Information > User Data >
Routes > New Route �
2� Select Use Chart or Use Waypoint List �
3� If you select Use Chart , use the map pointer ( ) to select the
initial location at which you want to start the new route� If you
select Use Waypoint List , select the first waypoint on the route�
4� Choose the location of the first turn and press SELECT � Repeat
until the route is complete�
5� Select MENU to save the route�
6� Select the route to edit the route, delete the route, or navigate to
the route�
To create a route using Automatic Guidance (when using a
preprogrammed BlueChart g2 Vision card):
1� From the Navigation chart, select your destination�
2� Select
Navigate To > Guide To � Your route is calculated�
NOTE: You can change the automatic guidance path to a route
by selecting the end of the path and selecting Navigate To >
Route To . The automatic guidance path stays on the screen,
allowing you to trace it while creating a route.
To edit a route:
1� From the Home screen, select Information > User Data >
Routes �
2� Select the route to edit�
3� Select
Edit Route � You can edit the route name or use the chart
or turn list to edit the route turns�