Garmin GPSMAP 526s User Manual
Page 40
34
GPSMAP 400/500 Series Owner’s Manual
Viewing Information
Selecting the Number of Engines Shown in Gauges
The engine gauges can show information for up to four engines.
1� From the Home screen, select
Information
>
Dashboard
>
Engine
>
MENU
>
Gauge Setup
>
Engine Selection
>
Num�
Engines
�
2� Select the number of engines�
3� Select
Back
�
To select the engines for which information appears in the gauges,
select
Edit Engines
and complete steps 2 through 5 of “Selecting
the Engines Shown in Gauges” (following section).
Selecting the Engines Shown in Gauges
You must manually select the number of engines shown in the
engine gauges (
) before you can select the engines for which
information appears in the gauges.
1� From the Home screen, select
Information
>
Dashboard
>
Engine
>
MENU
>
Gauge Setup
>
Engine Selection
>
Edit
Engines
�
2� Select
First Engine
�
3� Select the number of the engine for which you want to view
information in the first gauge or bar�
For example, if you select “3,” the first engine bar shows
information for the engine identified as “Engine3” on the NMEA
2000 network�
4� Repeat step 3 for the second, third, and fourth engine bar, as
needed�
5� Select
Back
�
Viewing Engine Gauges
To view engine information, your chartplotter must be connected to
a device capable of measuring fuel level, fuel flow, or both.
From the Home screen, select
Information
>
Dashboard
>
Engine
�
Fuel gauge
Fuel flow
Configuring Engine Gauges
The amount of fuel on board can be represented by either the total
fuel level (numeric) or by individual tank level (graphic).