Garmin nuvi 2585TV - Manual (Page 21)

nüvi 2585TV Owner’s Manual 21
Pairing your phone with your device allows your
phone and device to recognize each other and
connect quickly.
1 Place your phone and your device within 33 ft.
(10 m) of each other.
2 On your device, enable Bluetooth wireless
technology ( page 20 ).
3 Select an option:
• Select Add Phone.
• If you have already paired a different
phone, select Settings > Bluetooth >
Phone > .
4 On your phone, enable Bluetooth wireless
technology.
5 On your device, select OK.
A list of nearby Bluetooth devices appears.
6 Select your phone from the list, and select OK.
7 If necessary, on your phone, confirm that the
device is allowed to connect.
8 If necessary, enter the device Bluetooth PIN
(1234) into your phone.
Disconnecting Your Phone
1 Select Settings > Bluetooth.
2 Select Phone > None > Save.
Your phone is disconnected from your device but
remains paired with your device.
Tips After Pairing the Devices
• After the initial pairing, the two devices can
connect automatically each time you turn them
on.
• When your phone is connected to your device,
you are ready to make phone calls.
• When you turn on the device, it tries to connect
to the last phone to which it was connected.
• You might need to set your mobile phone to
connect to the device automatically when the
device is turned on.
Pairing with a Bluetooth Audio
Device
Using Bluetooth wireless technology, you can
transmit the device audio to a hands-free or A2DP
Bluetooth audio device.
1 Set your Bluetooth audio device to
discoverable mode.
2 From the main menu, select Settings >
Bluetooth > Audio > OK.
3 Select your Bluetooth audio device from the
list.
4 When the Bluetooth pass key appears, select
OK.
5 Confirm the pairing on your Bluetooth audio
device, if necessary.
See the owner’s manual for your Bluetooth
audio device for more information.