ASRock Z77 Extreme11 - Manual (Page 52)

52
ASRock Z77 Extreme11 Motherboard
English
2.16.2 Installing Three CrossFireX TM -Ready Graphics Cards
Step 1. Insert one graphics card into PCIE1 slot, another graphics card to
PCIE3 slot, and the other graphics card to PCIE5 slot. Make sure
that the cards are properly seated on the slots.
Step 2. Use one CrossFire TM Bridge to connect the graphics cards on
PCIE1 and PCIE3 slots, and use the other CrossFire TM Bridge
to connect the graphics cards on PCIE3 and PCIE5 slots. (The
CrossFire
TM Bridge is provided with the graphics card you pur-
chase, not bundled with this motherboard. Please refer to your
graphics card vendor for details.)
CrossFire TM Bridge
Step 3. Connect a VGA cable or a DVI cable to the monitor connector or
the DVI connector of the graphics card that is inserted to PCIE1
slot.