ACU-RITE DRO 200T - Manual (Page 21)

Readout Operations DRO 200T
14
5.
Move the tool away from the workpiece and measure the diameter
of the workpiece.
6.
Select the axis and enter the measured value.
7.
Press the define key again, and make a face cut.
8.
While the tool is still in contact with the workpiece, press the LOCK
AXIS
key.
9.
Move the tool away from the workpiece, and measure the length of
the shoulder.
10.
Select the axis and enter the measured value.
Dia = 1.05
8 3 . Z ENTER
1 0 5
ENTER
. X
DEFINE
.83
.83