Acura Embedded AcuTab-W - Manual (Page 26)

AcuTab 2 Manual
If your system does not install this module, this button can be
programmable to execute specific application. When you program
your application, please write this directory as listed below into your
configuration file, then the system will aware and execute this
application.
EXE="C:\WINDOWS\system32\mspaint.exe"
F5_PARA=""
F5_PATH=""
Barcode Buttons (Left Side)
When Scanner is scanning the Barcode, please press Barcode
Button simultaneously to enable this function.
If your system does not install this module, this button can be
programmable to execute specific application. When you program
your application, please write this directory as listed below into your
configuration file, then the system will aware and execute this
application.
EXE="C:\WINDOWS\system32\calc.exe"
F6_PARA=""
F6_PATH=""
Navigation Buttons
The navigation buttons include up, down, right, and left arrow keys
and the Enter key in the center.
This function lets you press the arrow keys to move the cursor up,
down, right, or left on the screen, after that press Enter to execute
the function.
RFID
Data/files transferring from the IR-equipped or equivalent device to
your AcuTab 2 System. This port only can receive data or files from
other RFID-equipped or equivalent device.
User Interface Button
26