Acura Embedded AcuTab-A - Manual (Page 37)

the total current load of all the connected devices.
--
--
Remove all power from the device prior to installing or removing any
accessories, hardware, or cables
Before cleaning the system, make sure it is disconnected from
any external power supplies (i.e. AC adapter).
2.2.4. Starting Your System
The Power/Resume button is found on the left side of the Tablet PC.
Press the Power/Resume button to start your system and check that if
the Power LED turns on.
After a few seconds, the system
’s display will turn on and your system
will begin to execute the Power On Self Test or POST to check if all
system components are running properly. Any error found during the
test will be displayed on the screen.
After the test, the screen will also display a message "press to
enter SETUP". You don
’t need to run this program at the moment as
your dealer already made the necessary settings for your computer
optimal operation.
After the test has completed, your computer will start to search and
boot up the operating system from your hard drive.
36