Acura Embedded AcuTab-A User Manual

Page 36

also has an auto-switching design that can connect to any 100VAC ~

240VAC power outlets.

To connect the power adapter:

1. Plug the AC adapter connector to the DC-Jack socket on the left

side of the system.

2. Plug the power cord to the AC adapter.

3. Plug the other end of the power cord to a live wall outlet, at the

same time, the Power LED at face panel lights up green.

For the power supply of this equipment, an approved power cord has

to be used.

Make sure the socket and any extension cord(s) you use can support