AcuRite 01033 Weather Station - Manual (Page 5)

TROUBLESHOOTING
Log on to
www.chaneyinstrument.com
To receive product updates
and information,
PRODUCT REGISTRATION
Product Registration
SUPPORT
Problem
Bad
Wireless Sensor
Reception
Display Console
Screen Not Working
No Wireless Sensor Data
(no communication)
Possible Solution
no bars
no bars and flashing
“ -- ” data
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST)
www.chaneyinstrument.com
Relocate the main unit and/or the wireless
sensor. Both units must be within 330 feet
(100m) from each other. Make sure both
units are placed at least 3 feet (.91 m) from
other electronic appliances and devices that
may interfere with the wireless
communication (such as TVʼs, microwaves,
computers etc). NOTE: It may take up to 20
minutes for the main unit to re-synchronize
with the sensor when batteries are replaced.
Use lithium batteries in sensor when
temperature is below -4ºF (-20ºC).
If wireless reception is bad (no bars), see
“Bad Reception” section above. The wireless
ID setting on each unit must match for all
units to communicate properly. See “Set
Wireless ID” on the next page.
Make certain that the batteries are installed
correctly.
Batteries may need replacing
TROUBLESHOOTING
8 7
SET
+
_
This wireless thermometer
uses long range 433mhz
radio frequency for
communication.
In the event that you have
reception problems due to
interference, both the
display unit and the
wireless sensor have
a selectable wireless ID.
The ID switches are
located within the battery
compartments of the
display unit and the
wireless sensor.
You may choose A, B or C;
but both the display unit
and the wireless sensor
ID's must match for
successful synchronization.
A B C
Both wireless ID’s
must match
A B C
A B C
Product Facts
Batteries: 5 x “AA” (not included)
Depending on home construction materials
Patent numbers: 5,978,738; 6,076,044; 6,597,990; US 7,637,141 B2
ACURITE ® is a registered trademark of the Chaney Instrument Co.
Lake Geneva, WI
Limited One
Year Warranty
Instructions &
Warranty Enclosed
Customer Care:
877-221-1252
Measurement Ranges
www.chaneyinstrument.com
Outdoor Temperature: -40ºF to 158ºF
-40ºC to 70ºC
Indoor Temperature: 32ºF to 122ºF
0ºC to 50ºC
Outdoor Humidity: 20% to 95%
Indoor Humidity: 20% to 95%
Wireless Range: 330 ft / 100 m MAX
Lithium Batteries Recommended in
Outdoor Sensor if temperatures are
below -4ºF
Set Wireless ID