beautypg.com

Inst10_01033w pg2, Introduction, Battery choice & temperature range – AcuRite 01033 Weather Station User Manual

Page 2: Overview setup setup

background image

Introduction

Thank You for purchasing this Acurite

®

product. Please read through this

manual in itʼs entirety to fully enjoy the benefits and features of this

product. Please keep this manual for future reference.

NOTE: A clear film is applied to the LCD at the factory that must be

removed prior to using this product. Locate the clear tab and simply peel

to remove.

Overview

SETUP

SETUP

Battery Choice & Temperature Range

Extended periods of cold temperatures ( below -4ºF / -20ºC ) can cause

alkaline batteries to function improperly. This will cause the outdoor

wireless sensor to stop transmitting temperature readings. Use lithium

batteries in these low temperature conditions to ensure continued

operation for wireless sensors placed outdoors. NOTE: Rechargeable

batteries are not recommended due to higher operating voltages.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY

SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove battteries from

equipment which is not to be used for an extended perid of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead

batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT

incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries

(alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Installing Batteries - Wireless Sensor

Installing Batteries - Display Unit

Remove the battery

compartment cover. Install

2 fresh “AA” batteries as

shown here.

BATTERIES

MUST BE INSTALLED FOR

THE SENSOR TO OPERATE

Remove the battery

compartment cover.

Install 3 fresh “AA”

batteries into the

battery compartment.

Replace the battery

compartment cover.

2

1

current

-12 hr. barometer

future forecast

humidity

temperature

indoor

outdoor

low

high

low

high

humidity

temperature

low

high

low

high

Outdoor

Temperature

Intelli-Time

®

Clock

Indoor

Temperature

Month,Date

Indoor

Humidity

Pressure

Graph

Weather

Forecast

Outdoor

Humidity

Pressure

Units