AcuRite 01502BPDI Weather Station - Manual (Page 5)

9 8
Set the Time & Date
The clock and calendar are utilized to time stamp history records and other
data, so it is important to set the time and date soon after you power on the
display unit.
Set the Date
1. Press the up or down arrow buttons until
“SET DATE?” is displayed on the Selectable
Category part of the display unit.
2. Press the “ ” button to set the date.
3. Press the up or down arrows to adjust the
month.
4. Press the “ ” button to confirm month
selection.
5. Press the up or down arrows to adjust the
day.
6. Press the “ ” button to confirm day
selection.
7. Press the up or down arrows to adjust the
year.
8. Press the “ ” button to confirm year
selection.
The date is now set.
Set the Time
1. Press the up or down arrow buttons until
“SET CLOCK?” is displayed on the
Selectable Category part of the display
unit.
2. Press the “ ” button to set the clock.
3. Press the up or down arrows to adjust the
hour. Note the “AM” and “PM” indicators.
4. Press the “ ” button to confirm hour
selection.
5. Press the up or down arrows to adjust
minutes.
6. Press the “ ” button to confirm minute
selection.
The clock is now set.
Select Measurement Units
To select between standard units (mph, ºF, etc.)
or metric units (kph, ºC, etc.):
1. Press the up or down arrow buttons until
“SET UNITS?” is displayed on the
Selectable Category part of the display
unit.
2. Press the “ ” button to set the unit
preference.
3. Press the up or down arrows to select
“STAND” for standard or “METRIC” for
metric units.
4. Press the “ ” button to confirm your
selection.
5. Next, you will see “WIND MPH”. Press the
up or down arrows to select MPH, KPH, or
KNOTS for wind speed units.
6. Press the “ ” button to confirm your
selection.
Units are now set.
Note: The “ ” stays in
Selectable Categories,
even after setup.