AcuRite 00605 Weather Station - Manual (Page 6)

10 PRODUCT SPECIFICATIONS MODEL# 00605
MEASUREMENT RANGE:
Indoor main unit
/companion
: +32º F to +122º F (0º C to + 50º C)
Outdoor/Indoor humidity : 20% - 99% RH
Wireless sensor : -4º F to +158º F (-20º C to +70º C)
Barometer : 900 to 1050 mb/hPa
Channel : maximum of three wireless sensors
WIreless Transmission : up to 30M (100 ft.) open area, RF 434 MHz
Resolution : 0.1º for temperature, 1% for humidity, 1 hPa mb for
pressure
Clock : WWVB radio-controlled, quartz back-up
Batteries : AA x 3 for main unit; AAA x 2 for COMPANION,
AA x 2 (lithium type recommended) for wireless
sensor
11 10
MEMORY / CLEAR
ZONE / hPa- inHg
SNOOZE / WAVE
TIME
manually clears the
memory for MIN or
MAX when viewing
records for each
view the year
to view channels
1,2 or 3 (if applicable)
change the
time zone
change the pressure
measurement
display units
silence the alarm
for 5 minutes
manually activates
the time signal
search mode
MEMORY / CLEAR
ZONE
ZONE / WAVE (& light)
TIME / CALENDAR & DST
manually clears the
memory for MIN or
MAX when viewing
records for each
view the date
to view channels
1,2 or 3 (if applicable)
change the
time zone
change the pressure
measurement
display units
•silence the alarm
for 5 minutes
•activates backlight
manually activates
the time signal
search mode
9 BUTTON ACTION DESCRIPTIONS
C
OMP
ANION
8 MULTIPLE WIRELESS SENSORS
The main unit supports up to three wireless sensors. Each additional wireless sensor
must be designated a different channel number. Assigning different channel numbers
differentiate each sensors temperature and hygrometer readings for the main units’
display. This is done automatically by the main unit and companion.
TO ADD A SECOND (or THIRD) WIRELESS SENSOR:
You must wait at least one hour after each sensor signal is acquired by the main unit
and the companion before adding an additional sensor. For example; if you wish to add
two more sensors- you must activate one (by installing batteries) and wait an hour
before activating the second one. In this way, that sensor will be properly designated
number “2”. Confirm that both the main unit and companion display the recently added
sensor by pushing the “CHANNEL” button to cycle through currently designated
wireless sensors before adding another sensor.
REFER TO SECTION 3 FOR WIRELESS SENSOR INSTALLATION INSTRUCTIONS
Additional wireless sensors are sold seperately. Call 1-800-556-2548 to order.
CH CH CH