AcuRite 00605 Weather Station - Manual (Page 3)

5 OVERVIEW - MAIN UNIT 6 USING THE COMPANION
Weather Forecast
Graph Shows Air
Pressure History
Alarm has
been set
Alarm has
been set
Moon Phase Wireless Signal Status
Antenna is
receiving the
time & date
signal
Antenna
receiving the
time & date
signal
Low Battery
Indicators
FUNCTION
BUTTONS
(FRONT)
FUNCTION
BUTTONS
(FRONT)
FUNCTION
BUTTONS
(BACK) FOR BUTTON
ACTION
DESCRIPTIONS
Low Battery
Indicators
Wireless sensor signal
capture (once a minute)
Month/
Date/
Day Time
Time OR Date
Display
Barometric Pressure
at a given hour
Outdoor Temperature
& Humidity
Wireless
Sensor
Channel
Number
Wireless sensor
channel Number
Indoor Temperature
& Humidity
Indoor Temperature
Outdoor Temperature
Trend
Indicator
5 4
PUSH “CALENDAR DST”
button to view date/year
CHANNEL MEMORY ALARM - + TIME
TIME + _ ALARM MEMORY
CALENDAR
DST
12/24 ºC/ºF CLEAR
CLEAR ºC/ºF 12/24
SEC. 7
SEC. 7
SEC. 9
SEC. 7
SEC. 8
SEC. 7
SEC. 7
ZONE SNOOZE
hPa/inHg WAVE
PRESSURE
RESET
(enlarged)
FUNCTION
BUTTONS
(BACK)
CHANNEL ZONE
RESET
SNOOZE/WAVE
(& backlite)
Radio-controlled Clock : The unit starts synchronizing the clock after the 1st channel
of the wireless sensor begins to send its information to the main unit. (This is called
registration.) The built-in antenna receives the official time signal from the US
Government's National Institute of Standards and Technology. A microchip translates
the time signal and adjusts the time display for the correct time, and date.
Manually setting the time and date:
Press and hold the “TIME” button, and the time display will flash on the screen. Using
the + and – buttons adjust each section and confirm (and move on) by pressing the
“TIME” button. (set order: hours, minutes, month, date, year, daylight saving time)
NOTE: You cannot change any settings manually if the clock is attempting to synchro-
nize. Allow the clock to finish the cycle, and then manual changes can be made if the
clock has not automatically acquired the signal and set itself to the correct time.
Time Zone:
Note: Default setting is Pacific Time. If you live outside of the Pacific Time Zone, you will
need to set your Time Zone using the following procedure:
Press the “ZONE” button on the back of the main unit to change the time zone settings.
PST = Pacific MST = Mountain CST = Central EST = Eastern
Currently selected time zone
SEE
FOR BUTTON
ACTION
DESCRIPTIONS
SEC. 9
SEE